Profiled in stock at low prices
Bracket for ventilated facades
Bracket – the most important part of the façade system, which secures the construction of ventilated facades to the carrier substrate. It is mounted on the support base (usually – it is a wall, but sometimes they can be a metal structure or floor slab) with steel anchors or anchor dowels. To reduce heat loss when used paronitovye fastening pads. Our company produces industrial facade brackets made of galvanized steel PRIMET.
How to choose a bracket
Several key factors to consider when choosing this element when facing the building. Depending on the thickness of insulation and wall roughness degree ventfasada mounting brackets of different lengths are used, the determination of which should take into account the size of the air gap. At the same time we should not forget about the lever rule: the longer, the greater the load. Also, be aware of the wind loads, especially important at a height. In addition, it is important to consider the type of lining, because when the device of ventilated facades of granite cladding material weight is greater than the weight of, for example, aluminum composite panels. Therefore, when the totality of all these factors suggests high intensity load, you should use reinforced brackets.
Types of facade brackets WILL
Normal bracket for ventilated facades
This view of the wall mount is manufactured of 50 mm in width, 50 mm in height ( “heel” bracket) and 2mm in thickness. Standard lengths ( “crash”), bracket 50, 70.100, 120, 150, 200 and 250 mm. It has two reinforcing ribs and a hole for fasteners. In addition to standard sizes, our company has the ability to manufacture conventional arms on the size of the customer. In addition, our company has its own powder coating plant, carrying out, if necessary, paint the brackets in order to improve their corrosion resistance.
Reinforced bracket ventfasadov
This is a more powerful version of the wall attachment having a width of 100 mm, a height of 80 mm and a thickness of 1.2 mm and 2 mm. Our plant produces reinforced brackets length of 90, 120, 150, 180 and 230 mm. But it can make them with an unusual “flight.” Enhanced version of the bracket has two ribs, two holes for mounting to the wall, “tongue” to fix the horizontal profiles facade and two holes for their fastening. If necessary, reinforced brackets and painted with powder paint.
Where to buy arms for ventilated facades
To purchase PRIMET facade system as a whole or its individual components you just call (863) 268-75-37 and our staff will advise you about the cost, availability and delivery and other issues.